CCNA1 v5.0 Introduction to Networks Final – CLI command answers

Router>
Router>enable
Router#configure terminal
Router(config)#interface g0/0
Router(config-if)#ip address 192.168.1.126 255.255.255.224
Router(config-if)#description IT Department LAN
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface g0/1
Router(config-if)#ip address 192.168.1.158 255.255.255.240
Router(config-if)#description Administration LAN
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#ipv6 unicast-routing
Router(config)#interface g0/0
Router(config-if)#ipv6 address 2001:db8:acad:A::1/64
Router(config-if)#ipv6 address FE80::1 link-local
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface g0/1
Router(config-if)#ipv6 address 2001:db8:acad:B::1/64
Router(config-if)#ipv6 address FE80::1 link-local
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#
Router(config)#hostname Middle
Middle(config)#Enable secret class12345
Middle(config)#line console 0
Middle(config-line)#password cisconet2014
Middle(config-line)#login
Middle(config-line)#exit
Middle(config)#line vty 0 15
Middle(config-line)#password cisconet2014
Middle(config-line)#login
Middle(config-line)#exit
Middle(config)#line aux 0
Middle(config-line)#password cisconet2014
Middle(config-line)#login
Middle(config-line)#exit
Middle(config)#
Middle(config)#Banner motd “Authorized Access Only”
Middle(config)#security password min-length 10
Middle(config)#service password-encryption
Middle(config)#ip domain-name ccna5.net
Middle(config)#username cisco secret cisconet2014
Middle(config)#crypto key generate rsa
The name for the keys will be: Middle.cisco.local
Choose the size of the key modulus in the range of 360 to 2048 for your
General Purpose Keys. Choosing a key modulus greater than 512 may take
a few minutes.
How many bits in the modulus [512]: 1024
% Generating 1024 bit RSA keys, keys will be non-exportable…[OK]
Middle(config)#line vty 0 15
Middle(config-line)#login local
Middle(config-line)#transport input ssh
Middle(config-line)#exit
Middle(config)#
—————————————–
Switch1 ip default gateway 192.168.1.158
—————————————–
PC0
default gateway FE80::1
default gateway 192.168.1.126
IP address 192.168.1.97/27
IPv6 address 2001:DB8:ACAD:A::FF/64
—————————————–
PC1
default gateway FE80::1
default gateway 192.168.1.126
IP address 192.168.1.98/27
IPv6 address 2001:DB8:ACAD:A::15/64
—————————————–
PC2
default gateway FE80::1
default gateway 192.168.1.158
IP address 192.168.1.145/28
IPv6 address 2001:DB8:ACAD:B::FF/64
—————————————–
SERVER TFTP
default gateway FE80::1
default gateway 192.168.1.158
IP address 192.168.1.146/28
IPv6 address 2001:DB8:ACAD:B::15/64
—————————————–
Backup the Configuration of the Town Hall Router to TFTP.
Middle#copy running-config tftp
Address or name of remote host []? 192.168.1.146
Destination filename [Router-confg]? [Press Enter]